The plastic-coated formwork panel of the future
Experience the future of conreting with the Tobler Longlife Panel. The innovative formwork panel has all-round polyurethane edge protection. Neither falls nor heavy blows can harm the panel.
Longlife Panels can cope with more than 100 usage cycles with a consistent concrete look and are ideal for exposed concrete.
| Technical information | |
| Wood type: | spruce |
| Coating: | 3-layer concrete formwork panel with plastic surface, abrasion-resistant, nailable |
| Thickness: | 27 mm |
| Bending strength EN 785: | 35 m² |
| Specific weight: | 15,5 kg/m² |
Sustainably cost-efficient
Get ready for sustainbability with the new Tobler Longlife Panel.
A conventional formwork panel just lasts around 10 uses before it already has to be replaced.
A Tobler Longlife Panel manages 100 or even more usage cycles with a perfect look. It pays off after as little as 30 uses – both for you and our environment.
Benefits
- Plastic-coated with polyurethane edge protection
- Consistent, durable concrete appearance
- For a perfect exposed concrete result
- Integrated nail holes
- Impact-resistant edges and corners
- Economic efficiency
- Long service life
Resistant formwork panel with plastic surface
You can achieve smooth, even concrete surfaces using the three-layer FIR – Stock formwork panel with its polyolefin-based formwork shell. The plastic surface makes it easier to nail, thus avoiding chipping during nailing. The panel is both resistant to water, alkali concrete and other corrosive agents.
| Technical information | |
| Wood type: | spruce |
| Coating: | 3-layer concrete formwork panel with polyolefin-based plastic surface |
| Thickness: | 27 mm |
| Bending strength EN 789: | 35 m² |
| Specific weight: |
15,0 kg/m² |
Benefits
- High wear resistance
- No chipping when nailing
- Water-resistant surface (< 3 %)
- Quick and easy removal of concrete residues from panels
- Chemically resistant
- Long service life
The conventional coated wooden formwork panel
The 3-layer formwork panel combines quality, durability, and dimensional stability. The panel is fully sanded and weatherproof glued with a melamine resin coating.The special PU edge sealing prevents penetration of moisture and concrete adhesion. Large or special sizes are also available on request.
| Technical information | |
| Wood type: | spruce |
| Coating: | Fully sanded surface Resistant melamine resin coating |
| Glue: | BFU 100 (AW 100) |
| Thickness: | 27 mm |
| Bending strength EN 789: | 35 m² |
| Specific weight: | ca. 12,5 kg/m² |
Benefits
- Highest quality and dimensional stability
- Water-repellent edge sealing
- No cracking due to the bar structure in the ceiling layers
- Fully sanded
- Resistant melamine resin coating
- Continuously glued middle layer, thus no breaking of the longitudinal edges